Finsulate

Antifouling products

Antifouling wrap

Seagrade

The Seagrade variant was developed for prevalent use in salt waters. However, it also is efficient in freshwater areas. Finsulate Seagrade will have maximum antifouling efficiency. Barnacles, plume worms or other marine on-growth is prevented. And should some of these appear on the hull of your yacht, because your yacht was not moved for extended periods of time, then they’ll be quite easy to remove.

SUITABLE FOR

Pleasure Craft, Yachts And Vessels

Antifouling wrap

Lakegrade

The Finsulate Lakegrade variant was developed mainly for freshwater areas, with occasional stays in salt waters. Here, the biggest challenge is to prevent the on-growth of mussels and algae. And in (mountain) lakes, accumulation of chalk was another impact factor to consider. The Lakegrade version will prevent most of these types of on-growth. And in cases where you do find some on-growth on the hull, just brush it off or apply some high pressure water.

The Lakegrade variant would also be our recommendation if you plan to cruise occasionally in salt water, too, for several weeks at a time.

SUITABLE FOR

Yachts & Motorboats

Lakegrade

Review

LAKEGRADE – 50 FT YACHT

After 3 seasons in use, I can state that the product works well and it looks like it will work for the years to come. Next year we go to fresh water (Danube to NL). Let’s see what happens then. I wish you luck with your business!

Owner – Black Sea and Eastern Mediterranean

Antifouling wrap

Speedgrade

Finsulate Speedgrade was developed for planing yachts and for commercial speed vessels. Speedgrade, as the name suggests, is optimized for speed. Which entails that this product variant may get some on-growth of organisms, especially in salty waters. However, that on-growth will be quite light and easily removable with the tools delivered: Either in the water or when lifting the yacht out of the water, then by using a high-pressure cleaner.

SUITABLE FOR

Yachts And Speedboats

Speedgrade

Review

SPEEDGRADE 26FT trawler
  • San Diego (California, USA)
  • Salt water
  • Planing mode, up to 20kt
  • Sailing frequency: 10-20 times per season
 

Product: Finsulate® Easy Clean Wrap
End of season maintenance: Monthly Cleaned with soft Scotch Brite pads in Summer time, bimonthly in wintertime, no fouling present.

Customer has saved on diving cost and has already saved one antifouling application.

Antifouling wrap

Seagrade EL

Seagrade EL was developed for ships and other structures which have to stay in the water for more than 5 years. For instance offshore constructions, FPSO (floating production storage and offloading) vessels or big cargo ships. Seagrade EL can also be a suitable antifouling version for catamarans which have few occasions for dry docking.

Seagrade EL can reach a lifespan of 20 years.

SUITABLE FOR

Vessels And Offshore Constructions

Our Warranty Conditions

Thank you for your interest in Finsulate foil

There are now a few questions that we need to be able to calculate a price indication for your boat. We will gladly send you this price indication by e-mail.

Good to know:

  1. In order to be able to give a 5-year warranty, good adhesion of Finsulate foil to the hull is of course essential. This adhesion is optimal on a bare underwater hull with 1 layer of epoxy.
  2. Finsulate film can only be applied by our trained employees, applicators or maintenance yards.
  3. The price indication you will receive includes labor, material and VAT, but excludes the removal of old anti-fouling paint layers.


You can post any questions and comments at the end of the form.
Now click on 'Start price request".

Enter the measurements of your ship to receive a price indication.
Your sailing area determines which type of Finsulate we will recommend.
Please fill in how we can contact you for the quote. Telephone is not required.

Thank you for your interest in Finsulate foil

There are now a few questions that we need to be able to calculate a price indication for your boat. We will gladly send you this price indication by e-mail.

Good to know:

  1. In order to be able to give a 5-year warranty, good adhesion of Finsulate foil to the hull is of course essential. This adhesion is optimal on a bare underwater hull with 1 layer of epoxy.
  2. Finsulate film can only be applied by our trained employees, applicators or maintenance yards.
  3. The price indication you will receive includes labor, material and VAT, but excludes the removal of old anti-fouling paint layers.


You can post any questions and comments at the end of the form.
Now click on 'Start price request".

Enter the measurements of your ship to receive a price indication.
Your sailing area determines which type of Finsulate we will recommend.
Please fill in how we can contact you for the quote. Telephone is not required.